www.decsinfotech.com | www.clickuwant.com

#Display all LPAR's
lslpars
lshmc –n (lists dynamic IP addresses served by HMC)
lssyscfg –r sys –F name,ipaddr (lists managed system attributes)
lssysconn –r sys (lists attributes of managed systems)
lssysconn –r all (lists all known managed systems with attributes)
rmsysconn –o remove –ip <ipaddr from lssysconn

lspartition -dlpar

# Display I/O locations
lshwres -r io --rsubtype slot -m Server-9117-570-SN10CC2BE --filter "lpar_names=AHE_NBAXA374"

# Display available CPU units:
lshwres -r proc -m Server-9117-570-SN100C94F --level sys

# Display status of managed system
lsled -m Server-9117-570-SN100C90F -r sa -t phys

# Display status of LPAR's on managed system
lsrefcode -r lpar -m "Server-9117-570-SN104635C"
lsled -m Server-9117-570-SN100C90F -r sa -t virtuallpar
get_cec_state -m "NGPS07 101EDFC"

# Display ip address of Managed system as it relates to HMC
lssyscfg -r sys -F ipaddr name

# Display lpar & its state.
lssyscfg -r lpar -m Server-9117-570-SN100C94F -F name,state

# Open terminal session to LPAR
mkvterm -m Server-9117-570-SN100C90F -p AHE_NBAXA530
mkvterm -m "7040-681*027222A" -p ODCS_NBAXA002

**** Hit enter, then ~. to disconnect from vterm ****

# Close open terminal session to LPAR
rmvterm -m Server-9117-570-SN100C90F -p AHE_NBAXA530
rmvterm -m "7040-681*027222A" -p ODCS_NBAXA002

# Clear up dynamic lpar misconfigurations
rsthwres -r proc -m Server-9117-570-SN1046D7E

# AIX shutdown LPAR
chsysstate -m Server-9117-570-SN100C90F -r lpar -o osshutdown -n AHE_NBAXA530 --immed
chsysstate -m 10A42ED AHEPS24 -r lpar -o osshutdown -n AHE_NBAXA221 --immed

# Power off managed system
chsysstate -n NGPS07 101EDFC -r sys -o off

# Power off partition
chsysstate -m Server-9117-570-SN100C90F -r lpar -n AHE_NBAXA530 -o shutdown
chsysstate -m 10A534D AHEPS35 -r lpar -n AHE_NBAXA535 -o shutdown

# Power on all LPAR's on frame:
for i in `lsled -m Server-9117-570-SN103D7EA -r sa -t virtuallpar|cut -c 21-33|grep COKE`; do
chsysstate -m Server-9117-570-SN103D7EA -r lpar -o shutdown --immed -n $i
sleep 5
done

# Power on managed system
chsysstate -m Server-9117-570-SN100C90F -r sys -o on
chsysstate -m 10A42ED AHEPS24 -r lpar -o on

# Power on LPAR, profile
chsysstate -m Server-9117-570-SN100C90F -r lpar -o on -n AHE_NBAXA528 -f AHE_NBAXA528_PROFILE
chsysstate -r sysprof -m 10A42ED AHEPS24 -o on -n AHE_NBAXA221 -f AHE_NBAXA221
chsysstate -n NGPS07 101EDFC -r sys -o on -c lpar -b std

# Power on all LPAR's on frame:
for i in `lsled -m Server-9117-570-SN103D8EA -r sa -t virtuallpar|cut -c 21-33|grep COKE`; do
chsysstate -m Server-9117-570-SN103D8EA -r lpar -o on -n $i -f $i\_PROFILE
sleep 30
done

# Power off lpar's all frame's now ...
for host in `lssyscfg -r sys -F name`; do
for lpar in `lsrefcode -r lpar -m $host -F lpar_name |grep AHE`; do
chsysstate -m $host -r lpar -o shutdown --immed -n $lpar
sleep 2
done
done

# Power on all lpar's all frames to SMS
for host in `lssyscfg -r sys -F name`; do
for lpar in `lsrefcode -r lpar -m $host -F lpar_name |grep AHE`; do
chsysstate -m $host -r lpar -o on -b sms -n $lpar -f $lpar\_PROFILE
sleep 2
done
done

# Delete all partitions from server(ignoring full system config profile)
for i in `lsled -m Server-9117-570-SN103DCEA -r sa -t virtuallpar|cut -c 21-33|grep COKE`; do
rmsyscfg -r lpar -m Server-9117-570-SN103DCEA -n $i
sleep 5
done

# Display Managed System attributes:
lssyscfg -r sys -m 'Server-9117-570-SN100C90F'

# Display LPAR attributes:
lssyscfg -r lpar -m 'Server-9117-570-SN100C90F'

# Display HW drawers
lshwres -r io --rsubtype unit -m 'Server-9117-570-SN100C90F'
lshwres -m '106D90C AHEPS16' -r slot

# Display DRC index and CEC NAME
lshwres -r io --rsubtype slot -m 'Server-9117-570-SN100C90F' -F drc_index,drc_name|grep E6A

# Create LPAR profile #1
mksyscfg -r lpar -m Server-9117-570-SN103DCEA -i \ "name=COKE_NBAXA550,profile_name=COKE_NBAXA550_PROFILE,lpar_env=aixlinux,min_mem=12288, \
desired_mem=12288,max_mem=49152,proc_mode=ded,min_procs=2,desired_procs=2,max_procs=16, \
conn_monitoring=0,auto_start=0,sharing_mode=keep_idle_procs,boot_mode=norm, \
\"io_slots=21010002//1,21010001//1,2101000C//1,21030013//1,21030018//1,21010017//1\""

# Create LPAR profile #2
mksyscfg -r lpar -m Server-9117-570-SN103DCEA -i \ "name=COKE_NBAXA552,profile_name=COKE_NBAXA552_PROFILE,lpar_env=aixlinux,min_mem=12288, \
desired_mem=12288,max_mem=49152,proc_mode=ded,min_procs=2,desired_procs=2,max_procs=16, \
conn_monitoring=0,auto_start=0,sharing_mode=keep_idle_procs,boot_mode=norm, \ \"io_slots=21020002//1,21010003//1,2101000E//1,21030012//1,21020017//1,21030017//1\""

# Create LPAR profile #3
mksyscfg -r lpar -m Server-9117-570-SN103DCEA -i \ "name=COKE_NBAXA556,profile_name=COKE_NBAXA556_PROFILE,lpar_env=aixlinux,min_mem=12288, \ desired_mem=12288,max_mem=49152,proc_mode=ded,min_procs=2,desired_procs=2,max_procs=16, \ conn_monitoring=0,auto_start=0,sharing_mode=keep_idle_procs,boot_mode=norm, \ \"io_slots=2101000A//1,2102000A//1,2103000A//1,21010019//1,21020019//1,21030019//1\""

# Create LPAR profile #4
mksyscfg -r lpar -m Server-9117-570-SN103D7EA -i \ "name=COKE_NBAXA557,profile_name=COKE_NBAXA557_PROFILE,lpar_env=aixlinux,min_mem=12288, \ desired_mem=12288,max_mem=49152,proc_mode=ded,min_procs=2,desired_procs=2,max_procs=16, \ conn_monitoring=0,auto_start=0,sharing_mode=keep_idle_procs,boot_mode=norm, \
\"io_slots=2101001A//1,2102001A//1,2104001A//1,2101000B//1,2102000B//1,2104000B//1\""

# Create LPAR profile #5
mksyscfg -r lpar -m Server-9117-570-SN100C90F -i \
"name=AHE_NBAXA542,profile_name=AHE_NBAXA542_PROFILE,lpar_env=aixlinux,min_mem=4096, \ desired_mem=4096,max_mem=49152,proc_mode=ded,min_procs=1,desired_procs=1,max_procs=16, \ conn_monitoring=0,auto_start=0,sharing_mode=keep_idle_procs,boot_mode=norm, \ \"io_slots=21040002//1,21040017//1,21010014//1,21020014//1,21030014//1,2103000F//1\""

# Create LPAR profile #6
mksyscfg -r lpar -m Server-9117-570-SN100C90F -i \
"name=AHE_NBAXA543,profile_name=AHE_NBAXA543_PROFILE,lpar_env=aixlinux,min_mem=4096, \ desired_mem=4096,max_mem=49152,proc_mode=ded,min_procs=1,desired_procs=1,max_procs=16, \ conn_monitoring=0,auto_start=0,sharing_mode=keep_idle_procs,boot_mode=norm, \ \"io_slots=21010015//1,21020015//1,21040015//1,21040010//1,21040003//1,21040018//1\""

# Create LPAR profile #7
mksyscfg -r lpar -m Server-9117-570-SN100C90F -i \
"name=AHE_NBAXA544,profile_name=AHE_NBAXA544_PROFILE,lpar_env=aixlinux,min_mem=4096, \ desired_mem=4096,max_mem=49152,proc_mode=ded,min_procs=1,desired_procs=1,max_procs=16, \ conn_monitoring=0,auto_start=0,sharing_mode=keep_idle_procs,boot_mode=norm, \ \"io_slots=2101000F//1,2102000F//1,21030002//1,21020012//1,21010011//1,21010016//1\""

# Create LPAR profile #8
mksyscfg -r lpar -m Server-9117-570-SN103DCEA -i \ "name=COKE_NBAXAXXX,profile_name=COKE_NBAXAXXX_PROFILE,lpar_env=aixlinux,min_mem=12288, \ desired_mem=12288,max_mem=49152,proc_mode=ded,min_procs=2,desired_procs=2,max_procs=16, \ conn_monitoring=0,auto_start=0,sharing_mode=keep_idle_procs,boot_mode=norm, \
\"io_slots=21010010//1,21020010//1,21030003//1,21010012//1,21010013//1,21010018//1\""

# Modify existing LPAR name
chsyscfg -r lpar -m Server-9117-570-SN100C90F -i "name=AHE_NBAXA530,
new_name=AHE_LPAR3"

# Modify existing Partition profile name
chsyscfg -r prof -m Server-9117-570-SN10462DC -i "name=BBSUB_NBAXA679_PROFILE,lpar_name=BBSUB_NBAXA679,new_name=BBSUB_NBAXA671_PROFILE"

# Modify existing Partition profile configuration:
chsyscfg -r prof -m Server-9117-570-SN10E08BE -i "name=COKE_NBAXA553_PROFILE,lpar_name=COKE_NBAXA553,min_mem=12288,desired_mem=12288"
# Add Adapter to Partition profile
chsyscfg -m Server-9117-570-SN104A2F0 -r prof -i "name=USLXVIOD4_PROFILE,lpar_name=USLXVIOD4,io_slots+=2101000A//1"
# Create partition using VIO SCSI/Ethernet:
mksyscfg -m Server-9117-570-SN104A2F0 -r lpar -i "profile_name=USLXSWU25_PROFILE,name=USLXSWU25,lpar_env=aixlinux,all_resources=0,min_mem=2048,desired_mem=4096,max_mem=4096,min_num_huge_pages=0,desired_num_huge_pages=0,max_num_huge_pages=0,proc_mode=shared,min_proc_units= 0.2,desired_proc_units=0.4,max_proc_units=0.6,min_procs=1,desired_procs=1,max_procs=1,sharing_mode=cap,uncap_weight=0,io_slots=none,lpar_io_pool_ids=none,max_virtual_slots=100,\"virtual_scsi_adapters=74/client/5/USLXVIOD4/74/1,44/client/3/USLXVIOD2/44/1\",virtual_eth_adapters=20/0/101//0/1,hca_adapters=none,boot_mode=norm,conn_monitoring=0,auto_start=0,power_ctrl_lpar_ids=none,work_group_id=none,redundant_err_path_reporting=0"
# Modify existing partition definition
chsyscfg -r prof -m Server-9117-570-SN100C90F -i "conn_monitoring=0,auto_start=0,name=AHE_NBAXA543_PROFILE,lpar_name=AHE_NBAXA543"
# VIO configuration example for SCSI adapter modification:
chsyscfg -m Server-9117-570-SN104A2F0 -r prof -i "name=USLXSWU24_PROFILE,lpar _name=USLXSWU24,\"virtual_scsi_adapters=74/client/5/USLXVIOD4/74/1,44/client/3/USLXVIOD2/44 /1\""
Legend
Blue: Power5
Red: Power4